Disassembly Procedure - Yamaha AW4416 Service Manual

DISASSEMBLY PROCEDURE

1. Bottom Cover
1-1 Remove the four (4) screws marked [990]. The
connector cover can then be removed. (Fig.1)
1-2 Remove the two (2) screws marked [910A]. The
CD-RW cover can then be removed. (Fig.1)
1-3 Remove the twelve (12) screws marked [910A]. The
bottom cover can then be removed. (Fig.1)
〈 Bottom View 〉
[990]
[900A]
CD-RW cover
[910A]
2. SUB-FADER Circuit Board
2-1 Remove the sixteen (16) fader knobs marked [680] and
the fader knob marked [690] in the control panel. (Fig.2)
2-2 Remove the bottom cover. (See procedure 1.)
2-3 Remove the six (6) screws marked [900B]. The SUB-
FADER circuit board can then be removed. (Fig.3)
[900A]
Bottom cover
Word direction
Connector cover
[900A]
(Fig.1)
[630]
[680]
[900A]
[900A]: Bind Head Tapping Screw-B
3.0 X 8 MFZN2BL (EP600190)
[910A]: Bind Head Tapping Screw-S
3.0 X 6 MFZN2BL (EP630210)
[990]: Bind Head Tapping Screw-S
SP3.0 X 6 MFZN2BL (V6273200)
[640] [660]
[690]
(Fig.2)
[650]
Jog knob
Shuttle knob
AW4416
31