Accessories; Utility Cart; Canvas Cover; Tig Torch Options - Lincoln Electric Square Wave TIG 200 Operator's Manual

SQUARE WAVE® TIG 200

ACCESSORIES

K520 - Utility Cart
Heavy duty cart stores and transports welder,
150 cubic foot shielding gas cylinder,
welding cables and accessories. Includes
stable platforms for welder and gas bottle,
lower tray for added storage capacity and
adjustable height handle.
K2377-1 - Canvas Cover
Protect your machine when not in use. Made
from attractive red canvas that is flame
retardant, mildew resistant and water repellent.
Includes a convenient side pocket to hold
welding torch or gun.

TIG Torch Options

o K1782-1 – PTA-17 with 12.5' one piece cable assembly
o K1782-3 – PTA-17 with 25' one piece cable assembly
o K1782-10 – PTA-17F Flexible Head with 25' one piece
cable assembly
o K1783-1 – PTA-26 with 12.5' one piece cable assembly
o K1783-3 – PTA-26 with 25' one piece cable assembly
o K1783-10 – PTA-26F with 25' one piece cable assembly
o K1781-1 – PTA-9 with 12.5' one piece cable assembly
o K1781-9 – PTA-9F Flexible Head, with 12.5' flexible one piece
cable assembly
o K1782-15 – PTA-17F Flexible Head with 12.5' Ultra-flex™ one
piece cable assembly
o K1782-14 – PTA-17F Package with Flexible Head Torch, Ultra-
flex™ cable assembly, one 1/16" E3® tungsten electrode, one
3/32" E3® tungsten electrode, one 1/16" collet and collet body,
one 3/32" collet and collet body, #7 nozzle, cable cover and
Twist-Mate™ adapter.
K1622-1 - Twist Mate™ Torch Adapter for
PTA-9 and PTA-17 Series Torches
Use to connect 1-piece air-cooled TIG torches
(PTA-9 125 Amp / PTA-17 150 Amp) to power
sources with combined gas/power
Twist-Mate™ connectors
K1622-3 - Twist Mate™ for PTA-26 Series
Torches
Use to connect 1-piece air-cooled TIG torches
(PTA-26 200 Amp) to power sources with
combined gas/power Twist Mate™ connectors
K963-3 - Hand Amptrol™ with 6-pin
Universal Connector
Provides 25 ft. (7.6 m) of remote current
control for TIG welding.
Parts Kits
Parts Kits provide all the torch accessories you need to start welding.
Parts Kits provide collets, collet bodies, a back cap, alumina nozzles
and tungstens in a variety of sizes, all packaged in an easy to carry
reclosable box. Five kits are available.
o KP508 – for PTA-17 Series Torches
o KP509 – for PTA-26 Series Torches
o KP507 – for PTA-9 Series Torches
K2374-1 200 Amp Electrode Holder
Includes Twist Mate™ connector. 12.5 ft. cable length.
K814 Arc Start Switch with 25 ft. (7.6m) cable assembly and 6-pin
Universal Connector.
Needed if an Foot or Hand Amptrol is not used when TIG welding to
initiate current. Current will rise to selected amperage setpoint upon
depression of switch.
C-1
ACCESSORIES