Settings And Options - Aztech WL578USB Easy Start Manual

Quick Installation Guide

Settings and Options

General Gen eral
Gen Gen eral eral
Display the status of the current connection SSID, encryption, MAC address and Quality of
the connection.
Profile Profile
Profile Profile
Here you can add, edit, duplicate and remove profile from your profile list.
Available Network Available Network
Available Network Available Network
Display the list of available wireless AP in range.
Status Status
Status Status
Shows the detail information about your connection
Wi- - - - Fi Protected Setup Wi Fi Protected Setup (WPS)
Wi Wi Fi Protected Setup Fi Protected Setup
This is an easy way to connect to your wireless AP with a push of a button. There are two
ways to connect to your wireless network via WPS.
PBC( ( ( ( Push Button Co PBC Push Button Configuration
PBC PBC Push Button Co Push Button Co
To connect using PBC, Push the WPS button on the WL578USB for 3 secs., then push the
WPS button on your wireless router within 2 mins. You can use either the physical button
or WPS simulation button found on the utility.
PIN PIN (Pin Input Config PIN PIN (Pin Input Configuration) (Pin Input Config (Pin Input Config
a. Push the PIN button from the utility
b. Select the Wireless AP
c. Within 2 minutes, enter the pin shown the screen to your AP's WPS PIN
configuration page.
Page 14 of 24
(WPS)
(WPS) (WPS)
nfiguration ) ) ) )
nfiguration nfiguration
uration) uration) uration)