Table Of Contents - Sony TRINITRON KV-HR36M91 Service Manual

(CAUTION)
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND THE
ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR CAR-
BON PAINTED ON THE CRT, AFTER REMOVING THE ANODE.
WARNING!!
AN ISOLATION TRANSFORMER SHOULD BE USED DURING
ANY SERVICE TO AVOID POSSIBLE SHOCK HAZARD, BE-
CAUSE OF LIVE CHASSIS.
THE CHASSIS OF THIS RECElVER IS DIRECTLY CONNECTED
TO THE AC POWER LINE.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING AND MARK ! ON
THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THE
PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE
THESECOMPONENTS WITH SONY PARTS WHOSE PART NUM-
BERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLE-
MENTS PUBLISHED BY SONY. CIRCUIT ADJUSTMENTS THAT
ARE CRITICAL TO SAFEOPERATION ARE IDENTIFIED IN THIS
MANUAL. FOLLOW THESE PROCEDURES WHENEVER CRITI-
CAL COMPONENTS ARE REPLACED OR IMPROPER OPERA-
TION IS SUSPECTED.

TABLE OF CONTENTS

Section
------
1. SELF DIAGNOSIS FUNCTION
2. DISASSEMBLY
2-1. REAR COVER ASSEMBLY ...................................... 9
2-2. CHASSIS ASSEMBLY ............................................... 9
2-3. SERVICE POSITION ................................................. 9
2-4. SPEAKER BOX ASSEMBLY .................................... 9
2-5. T AND UG BOARDS ............................................... 10
2-6. BM AND MG BOARDS .......................................... 10
2-7. A BOARD ................................................................. 10
2-8. D BOARD ................................................................. 11
2-9. SF BOARD ............................................................... 11
2-10. H3, H4, H5 AND HMG BOARD ............................. 11
2-11. HARNESS ARRANGEMENT ................................. 12
2-12. REMOVAL OF ANODE-CAP .................................. 13
2-13. CRT ........................................................................... 14
3. SERVICE MODE
3-1. METHOD OF SETTING THE SERVICE
ADJUSTMENT MODE ............................................ 15
3-2. SERVICE MODE ADJUSTMENT ........................... 15
3-3. MEMORY WRITE CONFIRMATION METHOD .. 15
3-4. ADJUSTING BUTTONS AND INDICATOR ......... 15
3-5. SERVICE MODE LIST ............................................ 16
4. SET-UP ADJUSTMENTS
4-1. INTIALIZING SFC DATA ....................................... 47
4-2. BEAM LANDING .................................................... 47
4-3. CONVERGENCE ADJUSTMENT .......................... 48
4-4. G2 (SCREEN) ADJUSTMENT ................................ 50
4-5. FOCUS ADJUSTMENT 1 ........................................ 50
4-6. NECK ASSY TWIST ADJUSTMENT ..................... 51
4-7. PICTURE DISTORTION ADJUSTMENT .............. 51
4-8. SFC COARSE ADJUSTMENT ................................ 51
4-9. SFC FINE ADJUSTMENT ....................................... 53
4-10. P&P SUB CONTRAST ADJUSTMENT (VIDEO) .. 54
4-11. P&P SUB-HUE AND SUB-COLOR
ADJUSTMENT (VIDEO) ......................................... 54
4-12. WHITE BALANCE ADJUSTMENT ....................... 55
4-13. FOCUS ADJUSTMENT 2 ........................................ 55
- 3 -
KV-HR36M61/HR36M91
RM-1007 RM-1007
Title
----
.................................... 5
Page
----