Summary of Contents
-
Page 1
• Before operating the unit, please read this manual thoroughly and retain it for future reference. Инструкция по эксплуатации • Перед работой с устройством внимательно прочтайте инструкцию и сохраните её для дальнейшего использования. KV-HW212 © 2004 Sony Corporation 2-177-672-12 (1)
-
Page 2
WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
-
Page 3
TV set weight. Ensure that the TV stand surface is flat and its area is larger than the bottom area of the TV. Made in Malaysia. Sony Corporation 6-7-35 Kitashinagawa, Shinagawa-ku, Tokyo, 141-0001 Japan. Do not plug in too many appliances to the same power socket.
-
Page 4
x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 3.8 mm screws Note • Use only the supplied screws. Use of other screws may damage the TV. 20 mm clamps Screw the band to the TV stand and to the provided hole at the rear of your TV.
-
Page 5: Table Of Contents
Table of Contents Installation Getting Started ... 6 Setting up your TV (“Initial Setup”) ... 7 Overview of Controls TV top control, front and rear panels ... 9 Using the remote control and basic functions ... 10 Advanced Operations Selecting the picture and sound modes ...
-
Page 6: Getting Started
Installation x Getting Started Installation Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •...
-
Page 7
x Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Начальная настройкa” (“Initial Setup”) menu will appear. You may change the menu language, preset the TV channels automatically, change the order of TV channels that appear on the screen and adjust the picture position using the buttons on the top control panel.
-
Page 8
continued The selected channel will appear on the screen. 2) Press 2 +/– to select the new program number position for your selected channel, then press t. 3) Repeat steps b) 1) and 2) if you wish to change the order of the other channels.
-
Page 9: Tv Top Control, Front And Rear Panels
Overview of Controls TV top control, front and rear panels TV top control panel SOUND MODE MENU TV front panel (MONO) Button/Terminal Function Turn off or turn on the TV. Remote control sensor. Wake Up indicator. Standby indicator. Headphone jack. Video input terminal 2.
-
Page 10: Using The Remote Control And Basic Functions
Using the remote control and basic functions Button PROG +/– 2 +/– 0 – 9, ÷ Overview of Controls PROG MENU Description Turn off temporarily or turn on the TV. Display the TV program. Jump to last program number that has been watched for at least five seconds.
-
Page 11
Button Description Select sound mode options with a 5-Band Graphic Equalizer display. Select picture mode options. Menu operations MENU Display or cancel the menu. Confirm selected items. V, v, B, b Select and adjust items. Timer operations Set TV to turn on automatically according to the desired period of time.
-
Page 12: Selecting The Picture And Sound Modes
Advanced Operations Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “Personal” option. PROG MENU Selecting the sound mode Press (or SOUND MODE on the top control panel) to select the desired sound mode with a 5-Band Graphic Equalizer display.
-
Page 13: Enjoying Stereo Or Bilingual Programs
x Enjoying stereo or bilingual programs You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. PROG MENU Note • If the stereo sound is noisy when receiving a stereo program, select “Mono”. The sound becomes monaural but the noise is reduced.
-
Page 14: Viewing Teletext
x Viewing Teletext Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. PROG MENU (red, green, yellow, blue)
-
Page 15: Introducing The Menu System
Menu Adjustment x Introducing the menu system The MENU button lets you open a menu and change the settings of your TV. The following is an overview of the menu system. Picture icon Sound icon Timer icon Channel Setup icon Setup icon Menu level 1 Level 1...
-
Page 16
continued Level 1 Level 2 “Timer” “Sleep Timer” “Wake Up Timer” “Channel Setup” “Auto Program” “Manual Program” “Program Label” “Program Block” “Program Sorting” “Setup” “Language” “Picture Rotation” “Wide Mode” “Video Label” “Color System” “Portable Audio Mode” Menu Adjustment Level 3/Function Set TV to turn off automatically.
-
Page 17
How to use the menu PROG Press MENU to display the menu. MENU Press V or v to select the desired item. Press confirm your selection and go to the next level. Other menu operations Adjust the setting value Move to the next/previous menu level Cancel the menu Tips •...
-
Page 18
x Changing the “Picture” setting The “Picture” menu allows you to adjust the picture settings. Press MENU. Make sure the “Picture” icon ( selected, then press Press V or v to select the desired item (e.g., “Mode”), then press Select “Mode”...
-
Page 19
x Changing the “Sound” setting The “Sound” menu allows you to adjust the sound settings. Press MENU. Press V or v to select the “Sound” icon ( ), then press Press V or v to select the desired item (e.g., “Mode”), then press Select “Mode”...
-
Page 20
continued Adjusting the “Sound Adjustment” item under “Personal” mode The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings of “Personal” mode in the menu. Make sure that “Adjust” is selected, then press Selecting “Reset” will set your TV to the factory setting.
-
Page 21
x Changing the “Timer” setting The “Timer” menu allows you to set TV to turn off and turn on automatically. Press MENU. Press V or v to select the “Timer” icon ( ), then press Press V or v to select the desired item (e.g., “Sleep Timer”), then press Select “Sleep Timer”...
-
Page 22
x Changing the “Channel Setup” setting The “Channel Setup” menu allows you to preset channels automatically, manually preset channels, label the program number, block unwanted programs and change the order of TV channels that appear on the screen. Press MENU. Press V or v to select the “Channel Setup”...
-
Page 23
Presetting channels manually After selecting “Manual Program”, select the program number to which you want to preset a channel. (1) Make sure “Program” is selected, then press (2) Press V or v until the program number you want to preset appears on the menu, then press Select the desired channel.
-
Page 24
x Changing the “Setup” setting The “Setup” menu allows you to change the menu language, adjust the picture position, change the picture size, label the connected equipment, select the color system and enjoy audio equipment sound. Press MENU. Press V or v to select the “Setup” icon ), then press Press V or v to select the desired item (e.g., “Language”), then press Select...
-
Page 25: Connecting Optional Components
Additional Information x Connecting the 3D WOOFER KV-HW212M95 only You can enjoy high quality sound by connecting the 3D WOOFER as follows: Step 1 Notes • Connect only the supplied 3D WOOFER; otherwise your TV may malfunction. • Unplug your TV from the wall outlet when connecting the 3D WOOFER. •...
-
Page 26
Connecting to the monitor output terminal ( T ) TV rear panel (MONO) Connecting to the component video input terminal ( TV rear panel (MONO) Notes • If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to either 525i/60Hz or 625i/50Hz interlace signals.
-
Page 27: Troubleshooting
Troubleshooting If you find any problem while viewing your TV, please check the following guide. If any problem persists, contact your Sony dealer. Troubleshooting guide Symptom Possible cause • The connection is loose Snowy picture or the cable is damaged.
-
Page 28
“Portable Audio Mode” to “Off”. • Do not use a hair dryer or other equipment near the TV. • Check the antenna setup. Contact a Sony dealer for advice. • Use a highly directional antenna. • Use the fine tuning (“Fine”) function.
-
Page 29
TV. • Check the antenna cable and connection on the TV, VCR and at the wall. • Check the antenna setup. Contact a Sony dealer for advice. — • Check the antenna cable and connectionon the TV, VCR, and at the wall.
-
Page 30
continued Symptom Possible cause • Changes in room TV cabinet temperature sometimes creaks. make the TV cabinet expand or contract, causing a noise. This does not indicate a malfunction. • The TV’s demagnetizing A small “boom” sound is heard function is working. when the TV is This does not indicate a turned on.
-
Page 31: Specifications
Tube size (cm) Screen size (cm) 630 519 Dimensions (w/h/d, mm) Mass (kg) Design and specifications are subject to change without notice. Sony Corporation KV-HW212M91 4 W + 4 W 5 W + 5 W 12 W – Output: 1 Phono jacks;...
-
Page 32
ВНИМАНИЕ!
-
Page 33
Sony Corporation 6-7-35 Kitashinagawa, Shinagawa-ku, Tokyo, 141-0001 Japan.
-
Page 34
x Безопасная установка телевизора 20 мм 3,8 мм Винты Зажимы Крепежная лента или Примечание...
-
Page 35
Содержание Установка Элементы управления Более сложные функции Настройка с помощью меню Дополнительная информация...
-
Page 37
V/v/B/b...
-
Page 38
Продолжение 2 +/–...
-
Page 39
SOUND MODE MENU (MONO) PROG +/– MENU SOUND MODE WOOFER (MONO) PROG (MONO)
-
Page 40
PROG +/– 0 – 9, ÷ PROG MENU –...
-
Page 41
MENU V v B b...
-
Page 42
PROG MENU 100 300 1k 3k 8k 100 300 1k 3k 8k 100 300 1k 3k 8k 100 300 1k 3k 8k...
-
Page 43
PROG MENU NICAM NICAM NICAM NICAM...
-
Page 44
PROG MENU...
-
Page 45
English...
-
Page 46
Продолжение...
-
Page 47
PROG MENU V v B 2 +/–...
-
Page 48
V v B...
-
Page 50
продолжение 100 300 1k...
-
Page 53
V v B...
-
Page 55
(MONO) (MONO) (MONO)
-
Page 56
Продолжение (MONO) (MONO) (MONO) (MONO)
-
Page 58
Продолжение...
-
Page 59
–...
-
Page 60
Продолжение...
-
Page 61
KV-HW212M95 KV-HW212M91 Sony Corporation...
Comments to this Manuals
Latest comments: