Table of Contents
Advertisement
SUPERSERVER 6027TR-DTRF+/D70RF+/D71RF+ User's Manual
6-11 Installing and Removing Hard Drives
The SC827HD chassis contains two individual serverboards in separate node
drawers. Each serverboard node controls a set of six hard drives. Note that if a
serverboard node drawer is pulled out of the chassis, the hard drives associated with
that node will power down as well. See the table below and Figure 6-17 for details..
Serverboard Drawer Locations in the Chassis
Serverboard B
Controls HDDs B1 - B6
Figure 6-14: Hard Drives and the Corresponding Serverboards
1
A
Caution: Use caution when working around the hard drive backplane. Do not touch
the backplane with any metal objects and make sure no cables touch the backplane.
Also, regardless of how many drives are installed, all twelve drive carriers must remain
in the chassis to maintain proper airfl ow.
Caution: Be aware that powering down a node will power down all the hard drives
that are logically associated with it (as shown in Figure 6-18).
1
A
1
B
1
B
Serverboard A
Controls HDDs A1 - A6
6-16
Advertisement
Table of Contents
