3-4
Drive Carrier LEDs
The server chassis uses SATA drives.
SATA Drives
Each SATA drive carrier has two LEDs.
•
Blue: Each Serial ATA drive carrier has a green LED. When illuminated, this
green LED (on the front of the SATA drive carrier) indicates drive activity. A
connection to the SATA backplane enables this LED to blink on and off when
that particular drive is being accessed.
•
Red: The red LED to indicate an SATA drive failure. If one of the SATA drives
fail, you should be notifi ed by your system management software.
Chapter 3: System Interface
3-3