Acpi Settings - Supermicro SuperServer 6027TR-DTRF+ User Manual

SUPERSERVER 6027TR-DTRF+/D70RF+/D71RF+ User's Manual

ACPI Settings

Use this feature to confi gure Advanced Confi guration and Power Interface (ACPI)
power management settings for your system.
ACPI Sleep State
Use this feature to select the ACPI State when the system is in sleep mode. Select
S1 (CPU Stop Clock) to erase all CPU caches and stop executing instructions.
Power to the CPU(s) and RAM is maintained, but RAM is refreshed. Select
Suspend Disabled to use power-reduced mode. Power will only be supplied to
limited components (such as RAMs) to maintain the most critical functions of the
system. The options are S1 (CPU Stop Clock) and Suspend Disabled.
NUMA (NON-Uniform Memory Access)
This feature enables the Non-Uniform Memory Access ACPI support. The options
are Enabled and Disabled.
High Precision Event Timer
Select Enabled to activate the High Precision Event Timer (HPET) that produces
periodic interrupts at a much higher frequency than a Real-time Clock (RTC)
does in synchronizing multimedia streams, providing smooth playback, reducing
the dependency on other timestamp calculation devices, such as an x86 RDTSC
Instruction embedded in the CPU. The High Performance Event Timer is used
to replace the 8254 Programmable Interval Timer. The options are Enabled and
Disabled.
Trusted Computing (Available when a TPM device is detected
by the BIOS)
Confi guration
TPM Support
Select Enabled on this item and enable the TPM jumper on the serverboard to
enable TPM support to improve data integrity and network security. The options
are Enabled and Disabled.
TPM State
Select Enabled to enable TPM security settings to improve data integrity and
network security. The options are Disabled and Enabled.
7-22