Installing The System Into A Rack; Separating The Sections Of The Rack Rails - Supermicro SuperServer 6027TR-DTRF+ User Manual

SUPERSERVER 6027TR-DTRF+/D70RF+/D71RF+ User's Manual
2-5

Installing the System into a Rack

This section provides information on installing the SC827 chassis into a rack unit
with the quick-release rails provided. There are a variety of rack units on the market,
which may mean the assembly procedure will differ slightly. You should also refer to
the installation instructions that came with the rack unit you are using.
NOTE: This rail will fi t a rack between 26" and 33.5" deep.

Separating the Sections of the Rack Rails

The chassis package includes two rail assemblies in the rack mounting kit. Each
assembly consists of two sections: an inner fi xed chassis rail that secures directly to
the server chassis and an outer fi xed rack rail that secures directly to the rack itself.
Rail Assembly
1 1
Extending the Rails
2
1
3
1
4
1
Figure 2-1: Separating the Rack Rails
Quick-Release Tab
Separating
the Inner Rail
Extension
2-4
Separating the Inner and Outer
Rails
1. Locate the rail assembly in the
chassis packaging.
2. Extend the rail assembly by
pulling it outward.
3. Press the quick-release tab.
4. Separate the inner rail
extension from the outer rail
assembly.