Dirt Devil M091950 Owner's Manual page 9

Return new filter to the dirt Align tabs on lid with the Return dirt container to
container lid. Push filter into openings on the dirt container cleaner. Align slot on bottom
place until it snaps to prevent and twist to close and secure of dirt container with tab on
leakage. lid. cleaner. Push to snap into
place.
TOOL REQUIRED: PHILLIPS O R FLATHEAD SCREWDRIVER
WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE SERVICING.
Lay cleaner flat and flip cleaner to Lift nozzle guard off. Lift and remove brushroll.
expose nozzle base. Base should lay Dispose of old belt.
flat and face up. To remove nozzle
guard, use Phillips screwdriver to
remove the five (5) screws. Arrows
show location of screws.
TO REPLACE BELT OR BRUSHROLL
Slide belt onto motorshaft.