Dirt Devil M091950 Owner's Manual page 10

With new belt in place, pull and
Reattach nozzle guard.
Replace all five (5) screws to
slide brushroll into nozzle making
secure nozzle guard.
sure that the brushroll end caps
are in the correct orientation (6a
inset). Rotate brushroll manually to
make sure belt is properly aligned.
TOOL REQUIRED: SMALL PHILLIPS HEAD SCREWDRIVER
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK - UNPLUG CLEANER BEFORE REMOVING O R
REPLACING LIGHTBULB.
This cleaner uses a common automotive lamp #906,13.0 volts. For bulb replacement call 1-800-321-1134
or visit our website at www.dirtdevil.com to locate a dealer nearest you.
Remove nozzle guard and
Turn cleaner over to remove Pull bulb(s) out of socket to
brushroll (See Pg. 9). Remove
headlight lens. remove. Do NOT twist. Gently
the two (2) bottom screws. push bulb into socket to
replace. Replace lens cover.
Replace headlight lens. Turn cleaner over. Secure the
headlight lens by replacing
the two
(2)
screws. Replace
brushroll and nozzle guard
(See Pg. 9).