Making/Answering Calls; Making Calls; Answering Calls - Panasonic KX-TGJ322E Operating Instructions Manual

Making calls

1
Lift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
2
M N
3
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Note:
R In step 1, you can store the dialled phone
number to the phonebook by pressing
MSAVEN.
Using the speakerphone
1
Dial the phone number and press MZN.
2
When you finish talking, press MOFFN.
Note:
R To switch back to the receiver, press MZN/
M N.
Adjusting the receiver or speaker
volume
Press MDN or MCN repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialled are stored
in the redial list (each 24 digits max.).
1
MEN REDIAL
2
MbN: Select the desired entry.
3
M N/M N
R If M N is pressed and the other party's
line is engaged, the unit automatically
redials multiple times.
Erasing a number in the redial list
1
MEN REDIAL
2
MbN: Select the desired entry. a
MERASEN
3
MbN: "Yes" a MOKN a MOFFN
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
TGJ32xE(en)_0305_ver011.pdf
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 21).
Example: If you need to dial the line access
number "0" when making outside calls with a
PBX:
1
2
Note:
R A 3 second pause is inserted each time MDN

Answering calls

1
2
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by
lifting the handset (page 28).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M
Adjusting the ringer volume
Press MDN or MCN repeatedly to select the
desired volume while ringing.
Press MjN or MkN repeatedly to select the
desired volume while ringing.
R To turn the ringer off, press and hold MkN
Note:
R To change the ringer volume and ringer
17

Making/Answering Calls

0 a MDN (Pause)
Dial the phone number. a M
(Pause) is pressed.
Lift the handset and press M
when the unit rings.
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Handset
Base unit
until the unit beeps.
tone for an outside call, see page 26.
N
N or MZN
N.
17
2015/03/05 14:31:39