General Information; General Information; Cutting Unit Operator's Manual; Supporting Cutting Unit When Servicing - Toro 04384 Service Manual

General Information

Cutting Unit Operator's Manual

The Cutting Unit Operator's Manual provides informa-
tion regarding the operation, general maintenance and
maintenance intervals for the DPA cutting units on your
Greensmaster 3250--D machine. Additionally, if optional
kits have been installed on the cutting units (e.g. rear
roller brush), the installation instructions for the kit in-
cludes set--up and operation information. Refer to those
publications for additional information when servicing
the cutting units.

Supporting Cutting Unit when Servicing

Whenever the cutting unit has to be tipped to expose the
bedknife or cutting reel, support the rear of the cutting
unit to make sure the nuts on the back of the bedbar ad-
juster screws are not resting on the work surface.
1
2
1
Figure 2
1. Nut 2. Support
Greensmaster 3250--D Page 7 - - 3
DPA Cutting Units