Husqvarna Viking Designer Diamond Royale User Manual page 72

DIMENSIONAL STITCHES- MENU Y
which stitch is selected and what type of fabric you will
choose.
Appliqué stitches
doesn't fray too much.
presser foot.
position.
gently guide the fabric. The machine will start to sew
and then stop automatically and the presser foot will
presser foot, directly behind the needle.
5. Continue sewing until the machine automatically
stops again.
6. Repeat step 3-5 until the desired stitch length is
reached.
T :
IP
piece of paper backed fusible web cut in the same size as
4:24 4:24
to select the needle down
4 Sewing
Pop-up stitches
Use: fabric, stabilizer and fabric for pop-ups cut in circular
presser foot.
position.
gently guide the fabric. The machine will start to sew
and then stop automatically.
4. With needle down, turn your fabric 90° clockwise
before you insert your fabric for the pop-up.
depending on the selected stitch.
6. Insert your folded pop-up fabric from the right side
under the presser foot. Make sure it is inserted from
the right and with the folded edge of your pop-up
control and continue sewing.
7. The machine will sew a few stitches sideways to the
right and a few stitches sideways to the left, back to
the center position and stop automatically.
8. Turn back the fabric to its original position and then
continue sewing until machine automatically stops
again.
9. Repeat step 4-8 until the desired stitch length is
reached.
Note: When sewing stitch Y2:26, in order for the pop-up to be
placed correctly, you need to turn the fabric counter clockwise and
make sure it is inserted from the right and with the folded edge of
your pop-up fabric all the way up to the needle. This stitch is a single
pattern and has a built-in tie-off.