Husqvarna Viking Designer Diamond Royale User Manual page 64

PERFECTLY BALANCED SENSOR
ONE-STEP BUTTONHOLE
buttonholes are to be sewn.
:
FABRIC
:
SELECT
:
USE
2. Plug the cord into the socket to the left underside in
3. Place your button on the buttonhole ruler on the
baseplate of the machine.
page 4:7.
wheel with the white marking line on the foot.
When sewing, your machine automatically sews the
Note: For woven heavy and leather, the Exclusive SEWING
ADVISOR feature selects buttonholes that should not be sewn
™
with the Sensor One-Step Buttonhole Foot.
Sew the buttonhole:
buttonhole.
The measurement wheel can be raised by lifting it,
which makes it easier to place the fabric under the
presser foot.
Note: Use the markings on the left toe of the Sensor One-Step
Buttonhole Foot to position the garment edge. Place the edge of the
garment at the middle mark to have
the buttonhole.
4:16 4:16
™ feature will select
™
™
'' (15 mm) from the edge to
5 /
4 Sewing
(a)
Sensor One-Step Buttonhole
Foot socket.
7
Place fabric edge here to place
buttonhole 5/8'' (15 mm) from edge.