Husqvarna Viking Designer Diamond Royale User Manual page 47

Start/Stop
Speed + and -
STOP
(Monochrome)
FIX
(Baste)
SELECTIVE THREAD CUTTER
Sewing Mode
cuts the top and bobbin threads, raises the presser foot and
To cut threads at the end of a stitch or stitch program, touch
stitch program is completed, the upper thread and bobbin
be programmed, see Program chapter.
Note: Your machine cuts the threads automatically after certain
stitches such as completing a Sensor One Step Buttonhole. Automatic
Selective Thread Cutter can be cancelled in the SET Menu, see page
3:7.
Embroidery Stitch-Out
bobbin threads are cut automatically.
NEEDLE STOP UP/DOWN
(TRIM POSITION)
Sewing Mode
or down. The setting of the needle stop position is changed
at the same time. This function will also set the needle
tap the foot control to raise or lower needle once you stop
sewing.
Embroidery Stitch-Out
easy thread trimming.
3 Ultimate Interactive Screen
Sensor Foot Up and Extra Lift
Sensor Foot Down and Pivot
Needle Stop Up/Down (Trim position)
Selective Thread Cutter
STITCH RE-START
Sewing Mode
When you stop sewing in the middle of a stitch, touch
stitch. The stitch or stitch program will remember any
special settings you made.
Embroidery Stitch-Out
position at the current stitch.
EXCLUSIVE SENSOR SYSTEM
the presser foot continuously senses the thickness of fabric,
and adjust the presser foot pressure.
Stitch Re-Start
™
™ feature,
3:15