Specifications And Options; Specifications - Icom IC-A120 Basic Manual

5

SPECIFICATIONS AND OPTIONS

■ Specifications

Use of 8.33 kHz Channel Spacing of this radio is strictly prohibited and shall not be used in Canada.
D General
• Frequency range:
IC-A120
IC-A120E (AUS version)
IC-A120E (Others)
• Channel spacing:
• Type of emission:
IC-A120
IC-A120E
• Number of memory channels: 200
• Antenna impedance:
• Antenna connector:
• Power supply requirement:
• Current drain (at 13.75 V):
TX
Maximum audio
• Operating temperature range:
IC-A120
IC-A120E (AUS version)
IC-A120E (Others)
• Dimensions:
(projections not included)
• Weight (approximately):
* 1 Except IC-A120E (AUS version).
11
118.000 to 136.99166 MHz
118.000 to 136.97500 MHz
118.000 to 136.99166 MHz
25 kHz/8.33* 1 kHz
6K00A3E/5K60A3E (FCC/EXP)
6K00A3E (Industry Canada)
6K80A3E/5K00A3E* 1
50 ø (nominal)
SO-239
13.75 V/27.5 V DC
(negative ground)
5.0 A
4.0 A
–30˚C to +60˚C,
–22˚F to +140˚F
–10˚C to +60˚C
–20˚C to +55˚C
161 (W) 45 (H) 175 (D) mm,
✕ ✕
6.3 (W) 1.8 (H) 6.9 (D) inches
✕ ✕
1.5 kg, 3.3 lb
D Transmitter
• Output power:
IC-A120 9 W (Carrier power) typical
10 W (Carrier power) maximum
IC-A120E 9 W±1.5 dB
(+15˚C to +35˚C)
9 W+1.5 dB/–3dB
(–20˚C to +55˚C)
• Frequency stability:
IC-A120 ±5 ppm
(–30˚C to +60˚C, –22˚F to +140˚F)
IC-A120E ±1 ppm (0˚C to +40˚C)
• Modulation system: Last stage modulations
• Audio frequency distortion:
IC-A120 Less than 10%
(at 70% modulation)
IC-A120E Less than 10%
(at 85% modulation +3 dB)