Pairing With A Headset; Af Output Setting - Icom IC-A120 Basic Manual

3
Bluetooth ® OPERATION

■ Pairing with a headset

These instructions describe pairing with the VS-3 Bluetooth
as example. You can pair a maximum of 7
headset
Bluetooth ® headsets with the transceiver.
• If you try to pair a Bluetooth
has 7 headsets paired with it, the oldest headset will automatically
be unpaired.
1. Turning ON Bluetooth
1) Open the "BLUETOOTH FUNC" menu.
MENU > SETTINGS > BLUETOOTH > BLUETOOTH FUNC
2) Activate the Bluetooth
➥ Select "ON" and push [ /MHz/GRP].
2. Entering the Pairing mode of the VS-3
• See the VS-3's instruction manual for details.
3. Pairing the Bluetooth
1) Open the "DEVICE SEARCH" menu.
MENU > BLUETOOTH > PAIR/CONNECT >DEVICE SEARCH
2) Search for the headset to pair.
➥ Select "HEADSET" and
push [ /MHz/GRP].
• Found headset is displayed.
• "NOT FOUND" is displayed if
no headset found.
• Push [MENU/CLR] to cancel
searching.
• The headset name changes
to its Bluetooth
address in 5 seconds.
7
® headset to a transceiver that already
® of the transceiver
® unit.
® headset
® device
3) Select the desired headset to pair.
®
➥ Push [∫] or [√] and then push [ /MHz/GRP].
• A passkey or PIN code may be required to pair,
depending on the headset.
4) Exit the Menu mode.
➥ Push [ ].
" " is displayed.
•

■ AF Output setting

You can select the AF output option in the "AF OUTPUT"
menu.
MENU > SETTINGS > BLUETOOTH
> HEADSET SET > AF OUTPUT
HEADSET:
HEADSET & SPEAKER: Outputs audio to both the
Outputs audio to the connected
Bluetooth ® headset.
connected Bluetooth ® headset and
the transceiver's speaker.