CrimeStopper REVO-1 Series Instructions Manual page 7

Hide thumbs Also See for REVO-1 Series:

TRANSMITTER PROGRAMMING

Fortin EVO-ONE Programming:

Note: Before you save your settings for programming of the EVO-ONE, ensure that you have Fortin 2 checked on

the remote starter options menu. Then save, disconnect and program the EVO-ONE to the vehicle.

1.Using the antenna cable that comes with the REVO kit, plug 1 end into the antenna and the other into the RF port

of the EVO-ONE. The RF port is the Blue 4-pin port next to the White port on the EVO-ONE. You will not need to

connect the power adaptor that comes with the REVO kit. NOTE: There are (2) Blue ports next to each other. Be

sure to use the Blue port furthest from the programming button.

Table of Contents

Revo-4 series