B. Clearance To Combustibles, Ul And Ulc - Quadra-Fire SANTAFEI-MBK Installation Manual

Santa Fe Pellet Insert

B. Clearance To Combustibles, UL and ULC

C
Figure 8.1
A Top of Hopper
B Side of Hopper
C Back of Hopper
D Vent Pipe to Combustible
INSTALLED AS A BUILT-IN UNIT
Shown with Rear Vent and Optional Outside Air
Combustible
Mantel
12 in
(305mm)
Figure 8.2
8
A
0 in. Clearance To Exposed Section And Face Trim
Top Vent:
2 in. (51mm)
Rear Vent:
2.5 in (64mm)
Back of Hopper:
2.5 in (64mm)
Vent Pipe to
Combustibles:
3 in (76mm)
AS A BUILT-IN
C
B
Top Vent
Rear Vent
Top or Rear Vent
Top or Rear Vent
Top or Rear Vent
6 in
(152mm)
Outside Air
7019-230C
D
B
C L
Inches Millimeters
2.0 51
2.5 64
2.0 51
2.5 64
3.0 76
WARNING
Fire Risk
Comply with all minimum clearances
to combustibles as specifi ed.
Failure to comply may cause house
fi re.
NOTE:
• Illustrations refl ect typical installations and
are FOR DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to
scale.
• Actual installation may vary due to
individual design preference.
May 18, 2015