Use Of Each Component; Gauges - Sym MaxSym 600i ABS User Manual

(The following is SYM 4 stroke liquid cooling scooter's basic operation, and they could vary from different
individual models. Please consult the end of this manual.)

GAUGES

Turn Signal
Indicator
Speedometer
Fuel
Indicator
CAUTION :
 Not to have trouble on electrical meter working, or damage the electrical meter.
 Do not wipe plastic components, e.g. instrument panel, headlight, with organic solvents such.
 As gasoline...etc. to avoid damaging these components.
 Speedometer:
This shows your speed in kilometers per hour (km/h)
and in mileage per hour (mph).
 Odometer:
This odometer shows the total kilometers this motor has been driven.
 Turn Signal Indicator:
The left or right Indicator will be flashing according to the operated directions of turn signal
light switch when it is turned on.
 Fuel Gauge:
The pointer in this gauge shows how much fuel remains in the tank.
The pointer stays in "E" position when key switch is turned to "OFF."
When key switch is turned to "ON", and the "pointer" also in "E" position (red area).Refuel immediately.
 Water temperature gauge:
To indicate engine coolant temperature.
When the main switch turns to "ON", the pointer indicator should be below the (H) position when the
scooter is operating.
If the pointer indicator stays above (H) position. Please check the coolant level of spare coolant tank
and check cooling fan for proper operation.
 Engine Oil Pressure Warning Light
If this indicator is activated more than 10 seconds after engine started, stop engine & check engine
lubrication.

7. Use of each component

6
TIME button
MODE button
SET button
Turn Signal
Indicator
Low Oil Pressure
Warning Light
ABS
Indicator
tachometer
Engine Coolant
Temperature