Important Points And Cautions For Starting Engine - Sym MaxSym 600i ABS User Manual

Hide thumbs Also See for MaxSym 600i ABS:
Table of Contents

Advertisement

CAUTION:
 Please check the engine oil and fuel volume are adequate or not before starting engine.
 To start engine the main parking stand must be firmly on the ground and the brake is applied on the
rear wheel to prevent the scooter from moving forward suddenly.
Turn ignition switch key to the "ON" position.
1. Apply rear wheel brake.
2. Do not accelerate, press starter button when the brake is applied.
[We care for you! Before drive off, keep the hand brake applied on the rear wheel.]
CAUTION:
 If engine can not be started after starter motor running for 3~5 seconds, turn the throttle valve handle
1/8~1/4 turns, and then press starter button again for an ease start.
 In order to avoid damaging the starter motor, please do not press the starter button continuously over
15 seconds.
 If engine still can not be started after pressing starter button over 15 seconds, stop and wait for 10
seconds before start it again.
 It is harder to get the engine started after the scooter has been left idle for a long time or after
refueling only after the fuel has been depleted. Then, it is necessary to press starting lever or starter
button several times, and keep the throttle valve handle at the close position to start the engine.
 It may need several minutes to warm up engine if it is a cold start.
 Exhaust contains harmful gases (CO), therefore please start the engine at a well ventilated place.

8. Important points and cautions for starting engine

16
1/8
1/4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents