Yamaha ACD1 Service Manual page 67

ACD1
[Example of Writing Completion Screen]
7. Solution when error message is displayed
When the error message as shown below is displayed, stop the writing data software, restart the ACD1 and then start writing the
component data from scratch.
If the same message is still displayed after restarting the data writing software and the ACD1, restart the personal computer, restart
the ACD1 and start writing the component data from scratch.
Error messages list
[ERROR:001] Command transmission was failed. (Securement of communication pathway )
[ERROR:002] Command transmission was failed. (Acquisition of communication control authority)
[ERROR:003] Command transmission was failed. (Control authority open)
[ERROR:004] Command transmission was failed. (Disconnection of communication pathway )
[ERROR:005] Communication pathway couldn't be secured.
[ERROR:006] Control authority couldn't be obtained.
[ERROR:401] Command transmission was failed. (Folder creation)
[ERROR:402] Command transmission was failed. (Format)
[ERROR:403] Command transmission was failed. (File update)
[ERROR:404] Format was failed.
[ERROR:405] Making folder was failed.
[ERROR:406] Update was failed.
67