Using the Enhanced Utilities (2)
7.4 More about RX Operation
This section describes the choice available in RX operation menu.
7.4.1 Setting NO. of RINGS
The unit will answer an incoming call after the number of rings set in this menu.
1. Press the Utility key 5 times then the display
appears the message "RX OPERATION".
2. Press "2" of Numeric keys. Then he
following message appears briefly to confirm
your selection.
3. Enter the desired number of rings as the
default and press Yes key.
4. Press No/Clear key, back to the initial state.
NOTE: No. of Rings is limited by country standard
7.5 Communication Setting
This section describes the choice available in Comm. Setting menu.
7.5.1 Setting LINE Monitor
Use this to set speaker volume while monitoring the fax activity.
1. Press the Utility key 6 times the display shows
the message "COMM.SETTING".
RX OPERATION?
OK=YES / or 1-8
2 NO. of RINGS
NO. of RINGS= 2 (1-16)
OK=YES
COMM. SETTING?
OK=YES / or 1-3
7-21
Utility
x 5
▲
▼
ABC
2
Yes
No
C
Utility
x 6
▲
▼