Using The Program Dial - NEC NEFAX 805 Operation Manual

Using the Enhanced Utilities (1)
5. To correct or delete the registered contents, press the
No/Clear key to DELETE or back to last LCD display.
For example: To program Timer TX for
Program Dial press '2' of the Numeric keys.
Enter the data according to the Timer
setting procedure.
For example: 12:30
1
Then press Yes key.
Use the numeric keys to input the Fax
number, and then press Yes key. Or use
Function utilities.
6. This completes the programming procedure
for Program Dial.
7. To exit from the registering of Program
Dial, press the No/Clear key twice. Then,
the initial screen appears.
If you want to continue registering for Program Dial, press another unused One Touch
k ey from 24, 25, 26, and 27.
6

.2.3.2 Using the Program Dial

1. Check that the message "SET DOC. FACE UP"
is shown on the Message Display.
If not, press the Copy/Fax key to switch.
2. Press the One Touch key in which the desired
Program Dial has been registered.
For example: One Touch key 27→ Timer TX
ABC
DEF
2
3
2 TIMER TX
TIMER=_ :
OPER
TIMER =12:30
0
OK=YES
= ENTER FAX NO.
→ or FUNCTION
-SELECT REGIST.KEY-
JAN.01 15:38
-SET DOC. FACE UP-
PROGRAM DIAL 27
TIMER TX
6-17
ABC
2
Yes
(COMPLETE=NO)
No
C
100%