Using the Enhanced Utilities (2)
7.1 Machine Setting
This section describes the choice available in "MACHINE SETTING".
7.1.1 Setting AUTO RESET
This function allows the machine back to initial mode automatically, when the machine is
idle in copy operation mode or fax operation mode a time period.
1. Press the Utility key then the message
"MACHINE SETTING" appears.
2. Press "1"of Numeric keys.
Then the following message appears briefly
to confirm your selection.
3. Press ◄ or ► key to select ON or OFF as the
default setting and press Yes key.
If you select ON, the display prompt the
message asks for your select of the reset time
interval (minutes). Press ◄ or ► key to select
the desired interval, and then press the Yes
key to accept this selection.
4. The "MACHINE SETTING" appears again,
press No/Clear key back to initiate state.
The message shows the initiate state.
MACHINE SETTING?
OK=YES / or 1-7
1 AUTO RESET
* ON
◄ , ► & YES
0.5
*1
◄ , ► & YES
MACHINE SETTING?
OK=YES / or 1-7
TEXT
7-3
Utility
▲
▼
1
OFF
Yes
2
3
4
▲
▼
No
C
1