Setting Of Rx Operations; Memory Rx Mode; Programming For Memory Rx Mode - NEC NEFAX 805 Operation Manual

Using the Enhanced Utilities (1)

6.4 Setting of RX Operations

6.4.1 Memory RX Mode

Memory RX Mode stores in memory the contents of a received document. The document
is not printed unless the machine receives a print out command. This feature provides a
means of controlling the documents received through fax. The print command may be a
timer or password.
The print timer command causes the machine to start printing the document stored in
memory when the specified time arrives. The password print command, on the other hand,
causes the machine to start printing when a password is input.
A print timer command can be used in combination with a password print command.
When a print timer command has previously been defined and if you want a printout
before the set time, you can enter the password to let the machine print the document
earlier than the set time if a password print command has also been set.

6.4.1.1 Programming for Memory RX Mode

1. Press the Utility key 5 times
The display changes to the "RX
OPERATION"
2. Press '1' of the Numeric keys.
The display now changes to the Memory
RX Mode.
3. Press the ◄ or ► key to select the memory
reception mode "ON".
4. Check that "ON" is selected and then press
the Yes key.
5. Setting print timer
Using the Numeric keys, enter the on time
(24-hour system) at which you want to
receive into memory.
For example: 3:05 p.m.
RX OPERATION ?
OK=YES / or 1-8
1 MEMORY RX MODE
ON
*ON
Yes
ON TIME = 15:05
OK=YES
6-21
Utility
1
*OFF
◄ , ► & YES
OFF
◄ , ► & YES
x 5
▲
▼