1 - 10 MC75A Enterprise Digital Assistant Integrator Guide
Installing SAM Cards in MC75A6 HF RFID
The MC75A6 HF RFID uses Security Authentication Module (SAM) cards to store encryption keys. To install
SAM cards:
Press the red Power button to suspend the MC75A.
1.
Using a torx (T5) screwdriver, remove four screws securing the plate to the back housing.
2.
Remove Plate
Figure 1-8
Lift plate off the back housing.
3.
Remove the plug covering the SAM slots.
4.
Remove Plug
Figure 1-9
Insert a SAM card into one of the slots with the contacts facing down (front of the device).
5.