Battery Charging Indicators - Motorola MC75A Integrator Manual

Inserting the Spare Battery
Figure 2-20
Insert the spare battery in the spare battery charging slot in the cradle with the charging contacts facing up
2.
and to the rear of the cradle.
Release the battery release lever. The battery release lever locks the spare battery into place.
3.
To remove a spare battery, hold back the battery release lever and lift the battery from the spare battery slot.
Removing the Spare Battery
Figure 2-21

Battery Charging Indicators

The Vehicle Cradle charges the MC75A's main battery and a spare battery simultaneously.
The MC75A's charge LED indicates the status of the battery charging in the MC75A. See
1-4 for charging status indications.
The spare battery charging LED on the cradle indicates the status of the spare battery charging in the cradle.
See Table 2-7 for charging status indications.
The 3600 mAh battery fully charges in approximately five hours and the 4800 mAh battery fully charges in
approximately seven hours.
Vehicle Cradle Spare Battery LED Charging Indicators
Table 2-7
Spare Battery LED
(on cradle)
Slow Blinking Amber
Battery Release Lever
Battery Release Lever
Spare battery is charging.
Accessories 2 - 21
Table 1-2 on page
Indication