Users Instructions; Appliance Log Book - Biasi RIVA OV M110.18SM/OV User Manual And Installation Instructions

SERVICE MODE:
The appliance enters the
turning the control knob fully clockwise. The LED
displays a flashing 'H.'. In this mode the
appliance runs at the minimum CH output. This
mode allows the gas valve offset and CO
emissions to be measured.
Note: The appliance can be placed into
maximum output by briefly turning the control
knob out of and back into service mode.
Fig 24.
5.8

Users Instructions

Upon completion of commissioning and testing
the system, the installer must instruct the user in
how to operate the appliance by drawing the
user's attention to the following.
a) Give these Instructions to the householder
and emphasise their responsibilities under
the 'Gas Safety (Installation and Use)
Regulations or rules in force.
b) Explain and demonstrate the lighting and
shutdown procedures.
c) Advise the householder on the efficient use of
the system, including the use and adjustment
of all system controls for CH.
d) Advise the user of the precautions necessary
to prevent damage to the system, and to the
building, in the event of the system remaining
inoperative during frost conditions.
e) Explain the function of the CH Temperature
Control knob, and how to reset the appliance.
Emphasise that if cutouts persists, the
appliance should be turned off and the
installer or service engineer consulted.
24
SERVICE mode by
2
f) Stress the importance of an annual service by
a registered heating engineer.
g) The electrical mains supply to the appliance
must remain ON for the frost protection circuit
to operate.
5.9

Appliance Log Book

A logbook is supplied with this appliance to
record installation and commissioning details
and to make future servicing of the appliance
easier.
This logbook forms part of the industry's
Benchmark code of practice for the installation,
commissioning and servicing of central heating
systems.
Please ensure that the logbook is fully
completed and left with the customer for future
reference, along with Users Instructions and this
Installation and Servicing Instruction manual.