Content Filtering
DFL-1100 HTTP content filtering can be configured to scan all HTTP content protocol
streams for URLs or for web page content. If a match is found between a URL on the URL
block the DFL-1100 blocks the web page.
You can configure URL blacklist to block all or just some of the pages on a website. Using
this feature you can deny access to parts of a web site without denying access to it
completely.
The HTTP content filtering can also be configured to strip contents like ActiveX, Flash and
cookies.
There is also a URL whitelist for URLs that should be excluded from all Content Filtering.
Note: For HTTP URL filtering to work, all HTTP traffic needs to go trough a policy using a
service with the HTTP ALG.
Edit the URL Global Whitelist
Follow these steps to
add or remove a url.
Step 1. Go to
Firewall and Content
Filtering and choose
Edit global URL
whitelist
Step 2. Add/edit or
remove the URL that
should never be
checked with the
Content Filtering.
Click the Apply
button below to apply
the change or click
Cancel to discard
changes.