Schedules; Add New Recurring Schedule - D-Link DFL-1100 Manual

Schedules

It is possible to
configure a schedule
for policies to take
affect. By creating a
schedule, the DFL-
1100 is allowing the
firewall policies to be
used at those
designated times only.
Any activities outside
of the scheduled time
slot will not follow the
policies and will
therefore likely not be
permitted to pass
through the firewall.
The DFL-1100 can be
configured to have a
start time and stop
time, as well as
creating 2 different
time periods in a day.
For example, an
organization may only
want the firewall to
allow the internal
network users to access the Internet during work hours. Therefore, one may create
a schedule to allow the firewall to allow traffic Monday-Friday, 8AM-5PM only.
During the non-work hours, the firewall will not allow Internet access.

Add new recurring schedule

Follow these steps to add new recurring schedule.
Step 1. Go to Firewall and Schedules and choose Add new.
Step 2. Enable the checkbox named Recurring scheduling.
Step 3. Use the checkboxes to set the times this schedule should be active.
Click the Apply button below to apply the change or click Cancel to discard changes.