Raymarine Quantum Installation Instructions Manual page 28

Multiple multifunction display configuration
A Raymarine network switch can be used to connect
the unit to more than 1 multifunction display.
2
Item Description
1
Quantum™ radome (for clarity, only the
connections area of the underside of the unit is
shown here).
2 RayNet cable.
3 RayNet network switch.
4 Connector panel of compatible Raymarine
multifunction display.
5 Connector panel of additional compatible
Raymarine multifunction display.
For details on available network hardware and
cables refer to Chapter 10 Spares and
28
1
12 / 24 V
D13409-2
accessories.
Quantum Radome