Additional Information
Message
PC is not connected.
Check the connection.
Sub-Camera is not
connected.
Check the connection.
Sub-Camera source is not
compatible.
Different video frequency or
resolution of TV is connected
with HDMI n.
Note
•
"n" is displayed as the
HDMI terminal's
number (1 to 3).
Check display resolution.
n is already in use.
Note
•
The IP address is
represented by n.
Cooling Fan Malfunction.
Please turn off the system
and call for service.
180
User Manual
•
A cable or cord is not properly connected.
→
Check that all cables to the unit are connected properly (Page 31).
•
The computer is not turned on.
→
Turn on the computer.
•
The computer is not set to output from its external monitor video out
port.
→
Change the computer's settings so that video is output from the external
monitor port.
•
A cable or cord is not properly connected.
→
Check that all cables to the unit are connected properly (Page 31).
•
The sub video camera is not turned on.
→
Turn on the sub video camera.
•
A cable or cord is not properly connected.
→
Check that all cables to the unit are connected properly (Page 31).
•
The signal input from the sub video camera is invalid.
→
A valid signal cannot be received from the connected sub video camera.
Contact your dealer.
•
A display with a video frequency different from that of the unit was
connected.
→
Match the unit's video frequency to the display being used.
A display that does not support 1920 ´ 1080 resolution was connected.
•
→
Use a display that supports 1080 resolution.
Note
•
The resolution of all connected displays will be lowered. When the
terminal connected to the display indicated in the message is
disconnected, the resolution will return to full HD.
•
The output for the terminal indicated in the message will display as
"Unsupported" in the unit information screen.
•
The computer's display resolution is incompatible with the unit.
→
Set your computer's resolution to a setting compatible with the unit
(Page 75).
•
On the network you are using, another device is already using the IP
address you have input for the unit.
→
Make sure that all devices on the network have unique IP addresses
assigned.
•
The CPU cooling fan within the device has stopped.
→
Quickly turn off the power. Contact your dealer.
Cause and Solution
Document Version 2015-08