NETGEAR AirCard 810S User Manual page 87

9. Change the PDP roaming protocol, if necessary:
• None
• IPV4
• IPV6
• IPV4V6
Note: PDP roaming protocol is the IP protocol used while you are roaming
(for example when you are traveling and the roaming network does
not support IPv6).
10. Click the Save button.
The entry is added to the table.

To select the APN to use:
1. From a computer or wireless device that is connected to your network, launch an
Internet browser.
2. Enter http://m.home or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The default password is admin. The password is case-sensitive.
The Home page displays.
4. Select Settings > Network > APN.
5. Select the Active radio button next to the APN entry.
The APN is selected.

To remove an APN entry:
1. From a computer or wireless device that is connected to your network, launch an
Internet browser.
Telstra Wi-Fi 4GX Advanced III
Advanced Settings
82