Modifications To Vehicle; Load Bed - Cushman 622020-L Owner's Manual

OPERATING PROCEDURES
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
Never use the winch to lift people or other overhead loads.
Do not use the winch to secure loads. Use a tie down designed for the job.
Do not apply shock loads to the winch.
Do not attempt to modify or weld the winch.

MODIFICATIONS TO VEHICLE

4
Changes to the weight distribution or the center of gravity may make vehicle unstable or prone to
roll over which could result in severe injury or death to the operator or passengers.
Do not modify the vehicle in any manner that will change the weight distribution of the vehicle. Changes to the weight
distribution or the center of gravity may make it unstable or prone to roll over which could result in severe injury or death
to the operator or passengers.

LOAD BED

To reduce the possibility of severe injury or death, read, understand and follow the Warning label
affixed to the front of the load bed. For safe operation of the vehicle, this label must be understood.
See the load bed warning label for maximum load. The load must be positioned in the bed as far
forward as possible, distributed in such a way that its center of gravity must not be higher than
height noted on label, and secured. Failure to follow these instructions may result in severe injury,
damage the vehicle and/or cause the vehicle to tip over. Use extra care when operating loaded
vehicle.
Do not permit any one to ride in the load bed.
Do not drive the vehicle with the load bed raised or with the tailgate unsupported.
When using a load bed, be sure to avoid backing up to the edge of a drop off, such as a loading dock or ravine. A
misjudgment of distance or an unstable surface could result in the vehicle falling backwards.
4 - 14