Wasp DELTA 2040 Use And Maintenance Manual page 21

USE and MAINTENANCE MANUAL
Before carrying out a print, make sure that the bed is on 0 level.
In order to put the bed on 0 level:
Push the button next to the display.
In the menu which appears on the display select Prepare
by turning the button and pushing it.
Turn the button and select "Auto Home".
After the selection of "Auto Home" turn the button and
select "Manual leveling.".
Level the bed on positions: 1, 2, 3, 0 by means of the
external wheels placed under the bed.
Page 21