Field Of Application; Optional Equipment / Spare Parts - Wasp DELTA 2040 Use And Maintenance Manual

USE and MAINTENANCE MANUAL

2.3 Field of application

Wasp 3D printers have been designed and manufactured to produce objects in plastic material
through the deposition of a melted fi lament.
It is possible to use materials like ABS, nylon, PLA, PS, PET, FLEX, EXPERIMENTAL (nozzle 0,7),
clay, silicone, resins.
The warranty is not valid anymore and the manufacturer is not responsible if the printer is used
with materials or purposes different from the above-mentioned ones.
WARNING
Read the instructions carefully as written on page 18.

2.4 Optional equipment / spare parts

The printers are supplied with many options. For any information about them apply to WASP
and to the dealer.
Optional equipment:
- 0.7mm - 0.9 mm extruder nozzle
- Porcelain kit (mixtures)
Spare parts:
- Filament puller
- Extruders
- Glass surface
- Belts
- Stepper motors nema 17
Consumable materials:
Reels in ABS, nylon, PLA, elastic polymers, Polystyrene, Laybrick (0,7 nozzle), Laywood (0,7
nozzle), PET.
For any information about many further materials that the printer can process apply to WASP
dealer.
Page 13