Humminbird HELIX 9 Operation Manual page 9

3. Select Normal. Press the RIGHT Cursor key.
Normal mode is required for on-the-water operation. If a functioning transducer is
Normal connected to the control head, Normal will be selected automatically, and your control head
can be used on the water.
To learn how to use your control head, select Simulator. You can save menu settings and
Simulator navigation data in Simulator mode (see Chart Overview and Navigation Overview for more
information).
To view system information for software version, GPS reception, and accessory connections,
System Status select System Status. See Check Accessory Connections and Check GPS Reception for more
information.
NOTE: If you wait too long to select a start-up option, the system will start the mode that is already highlighted. If your control head
goes into Demonstration mode, please note that menu settings cannot be saved in this mode (see Manage your Control Head).
Starting Normal Mode for on-the-water Operations
Press the
RIGHT Cursor key
9 Getting Started