Start The Timer - Humminbird HELIX 9 Operation Manual

Start the Timer

1. Main Menu: Press the MENU key twice. Select the Alarms tab.
2. Select Timer Setup.
3. Use the Cursor Control key to set the hours, minutes, and seconds.
4. To start the Timer immediately, select Start. Press the RIGHT Cursor key.
To save your settings and start the Timer at a later time, select Save. Press the RIGHT Cursor key.
NOTE: The Timer can be displayed as a digital readout. See Views: Display Digital Readouts.
Change the Display Language
The available languages are determined by your Humminbird model.
1. Main Menu: Press the MENU key twice. Select the Setup tab.
2. Select Language.
3. Press the RIGHT or LEFT Cursor keys to select a language.
Change Digital Readout Formats
Use the following instructions to customize the format for the digital readouts displayed on the control head. See Views: Display
Digital Readouts for more information.
Change the Digits Format
If you have Digital Readouts set to Boxes, you can change how the numbers are displayed.
1. Main Menu (Advanced User Mode): Press the MENU key twice. Select the Setup tab.
2. Select Digits Format.
3. Press the RIGHT or LEFT Cursor keys to select a format.
Change Units of Measurement
1. Main Menu: Press the MENU key twice. Select the Setup tab.
2. Select Units - Depth, Units - Distance, Units - Speed, etc., and select each unit setting as you prefer.
3. Close: Press the EXIT key.
NOTE: The Units - Temp menu is only available in an international model.
Manage your Control Head 152