Kyocera FS-C2626MFP Service Manual page 140

Code Contents
F000 Main PWB - operation panel
PWB communication error
F010 Main PWB checksum error
F020 Main PWB RAM checksum
error
F040 Main PWB - print engine
communication error
F041 Main PWB - scanner engine
communication error
F050 Print engine ROM check-
sum error
F051 Scanner engine ROM
checksum error
F278 Power supply in drive sys-
tem error
Causes
Defective main Turn the main power switch off/on to restart
PWB. the machine. If the error is not resolved,
replace main PWB (see page 1-5-30).
Defective opera- Replace the operation panel PWB and
tion panel PWB. check for correct operation.
Defective main Turn the main power switch off/on to restart
PWB. the machine. If the error is not resolved,
replace main PWB (see page 1-5-30).
Defective main Turn the main power switch off/on to restart
memory (RAM) on the machine. If the error is not resolved,
the main PWB. replace main PWB (see page 1-5-30).
Defective Replace the expanded memory (DIMM) (see
expanded memory page 1-2-12).
(DIMM).
Defective main Turn the main power switch off/on to restart
PWB. the machine. If the error is not resolved,
replace main PWB (see page 1-5-30).
Replace the engine PWB and check for cor-
rect operation (see page 1-5-27).
Defective main Turn the main power switch off/on to restart
PWB. the machine. If the error is not resolved,
replace main PWB (see page 1-5-30).
Defective engine Turn the main power switch off/on to restart
PWB. the machine. If the error is not resolved,
replace engine PWB (see page 1-5-27).
Defective engine Turn the main power switch off/on to restart
PWB. the machine. If the error is not resolved,
replace engine PWB (see page 1-5-27).
Main power switch Turn on power.
was turned off (To switch off power, first press the power
without using the key until the main power indicator goes off,
power key, or a then turn the main power switch off.)
power failure has
occurred.
1-4-26
Check procedures/
corrective measures
2M8/2M9