Kyocera FS-C2626MFP Service Manual page 116

Code
Controller sequence error
0100
Registration sensor not
0105
detected
Controller sequence error
0106
Inner tray open
0110
Rear cover open
0111
Front cover open
0112
Controller sequence error
0120
Controller sequence error
0121
Rear cover open (paper
0211
feeder 1)
Rear cover open (paper
0212
feeder 2)
No paper feed from cassette
0501
1
No paper feed from cassette
0502
2
No paper feed from cassette
0503
3
No paper feed from duplex
0508
section
No paper feed from MP tray
0509
Multiple sheets in cassette 1
0511
Multiple sheets in cassette 2
0512
Multiple sheets in cassette 3
0513
Multiple sheets in duplex
0518
section
Multiple sheets in MP tray
0519
*: Refer to figure 1-4-2 for paper jam location (see page 1-4-1).
Contents
Secondary paper feed request given by the con-
troller is unreachable.
Activation of the registration sensor (on/off) is
undetected for 90 s during printing.
Paper feeding request for duplex printing given by
the controller is unreachable.
The inner tray is opened during printing.
The rear cover is opened during printing.
The waste toner cover is opened during printing.
Paper feed request was received from the duplex
section despite the absence of paper in the duplex
section.
The controller issued the duplex section a request
for more pages than the duplex print cycle con-
tains.
The rear cover of paper feeder 1 is opened during
printing.
The rear cover of paper feeder 2 is opened during
printing.
The registration sensor (RS) does not turn on dur-
ing paper feed from cassette.
PF feed sensor 1 (PFFS1) does not turn on during
paper feed from paper feeder 1.
PF feed sensor 2 (PFFS2) does not turn on during
paper feed from paper feeder 2.
The registration sensor (RS) does not turn on dur-
ing paper feed from duplex section.
MP paper conveying sensor (MPPCS) does not
turn on during paper feed from MP tray.
The registration sensor (RS) does not turn off dur-
ing paper feed from cassette.
PF feed sensor 1 (PFFS1) does not turn off during
paper feed from paper feeder 1.
PF feed sensor 2 (PFFS2) does not turn off during
paper feed from paper feeder 2.
The registration sensor (RS) does not turn off dur-
ing paper feed from duplex section.
MP paper conveying sensor (MPPCS) does not
turn off during paper feed from MP tray.
Conditions
1-4-2
2M8/2M9
Jam
location*
C
-
E
-
-
-
E
E
-
-
A
F
G
E
B
A
F
G
E
B