Setting The Clock And Timer (Trx20 Only) - Mr. Coffee TR10 Operating Instructions Manual

Setting the Clock and Timer (TRX20
IMPORTANT: Please Read Before First Use
The clock on this model must first be set, before
the coffeemaker will operate.
To Set the Clock...
1. Turn the control switch to OFF.
2. Plug the power cord into your electrical outlet. The clock display will flash
until you set the time.
3. Repeatedly press or hold the HOUR and MINUTE buttons until you reach
the current time. The PM indicator light in the display will illuminate to indicate
PM time.
To Prdet the Brewing Time...
Press and hold the AUTO button while setting the desired brew time with the HOUR and
MINUTE buttons. The PM indicator light in the display will illuminate to indicate PM time.
To Automatically Brew set the Pre-set Time...
1. Follow steps 1 through 5 in BREWlNG COFFEE:.
2. Turn the control switch to OFF and then to AUTO.
3. Brewing will begin at the time you have preset, and the coffee will remain
hot in the decanter for two hours. To keep your coffee hot for an additional
two hours, turn the switch from AUTO to ON.
To Reset Auto Brew at Pre-set Time...
The programmable timer will NOT automatically brew the next day if
left in the AUTO position after its last use. This is a safety feature. If
the OFF indicator light in the lower right hand corner of the clock
display is illuminated. reset AUTO BREW by turning the control switch
to OFF and then to AUTO.
I I
I
Hour Minute AUIO
Set
IMPORTANT
only)
Off Indicator