Setting The Clock And Timer - Mr. Coffee SRX20 Operating Instructions Manual

Important, Please Read Before First Use
. THE CLOCK ON THIS MODEL MUST BE SET FIRST,
BEFORE THE COFFEEMAKER WILL OPERATE.
Please refer to setting the clock instructions, below.
. THE SPECIAL PAUSE 'N SERVE DECANTER LID MUST BE
PROPERLY IN PLACE ON THE DECANTER AT ALL TIMES.
This lid opens and closes the drip-stop valve on the bottom
of the brewing funnel. If this lid is not in place on the decanter
when brewing coffee, coffee will build up in the brewing funnel
and begin to overflow onto the warming plate.
. AUTOMATIC PAUSE 'N SERVE ALLOWS YOU TO REMOVE
THE DECANTER FOR NO LONGER THAN ONE MINUTE
to sneak a cup while the coffee is still brewing. If the decanter
is removed for more than one minute, the brewing funnel
will overflow.
Be sure any replacement decanter you purchase is a Mr.
Coffee decanter with the Pause 'n Serve lid.

Setting the Clock and Timer

PM INDICATOR
HOUR SET
advances clock
by the hour
SIGNAL LIGHT
indicates when
coffeemaker is on
TO SET CLOCK...
1. Move the CONTROL SWITCH to OFF.
2. Plug the power cord into your electrical outlet. The display
on the clock will flash until you set the time.
3. Alternately press and hold the HOUR and MINUTE buttons until
you reach the current time. A red dot will appear in the upper
left display corner for PM time.
TO PRESET THE BREWING TIME...
Simply press and hold the BREW SET button while setting the
brew time with the HOUR and MINUTE buttons. Please pay
attention to PM INDICATOR light.
3
CONTROL SWITCH
ON - OFF - AUTOMATIC
5
AUTO OFF LIGHT
indicates machine shut
itself off or Auto brew
needs to be reset
BREW SET
sets time to brew
MINUTE SET
advances clock
by the minute