System Board - HP Pavilion x360 Maintenance And Service Manual

2. Release the power connector (2) from the retention clips built into the bottom cover.
3. Remove the power connector cable.
Reverse this procedure to install the power connector cable.

System board

Description
Equipped with an AMD A8-6410 2.00-GHz (SC turbo up to 2.40-GHz) processor (1600-MHz FSB, 2.00-
MB L2 cache, quad core, 15 W) and the Windows 8 Standard operating system
Equipped with an AMD A8-6410 2.00-GHz (SC turbo up to 2.40-GHz) processor (1600-MHz FSB, 2.00-
MB L2 cache, quad core, 15 W) and a non-Windows 8 Standard operating system
Equipped with an AMD A6-6310 1.80-GHz (SC turbo up to 2.40-GHz) processor (1600-MHz FSB, 2.00-
MB L2 cache, quad core, 15 W), a graphics subsystem with UMA memory, and the Windows 8 Standard
operating system
Equipped with an AMD A6-6310 1.80-GHz (SC turbo up to 2.40-GHz) processor (1600-MHz FSB, 2.00-
MB L2 cache, quad core, 15 W), a graphics subsystem with UMA memory, and a non-Windows 8
operating system
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
components:
a. Battery (see
b. WLAN module (see
c. Fan (see
d. Audio/USB board (see
Keyboard/top cover on page
Battery on page 30)
WLAN module on page
Fan on page 35)
Audio/USB board on page
26), and then remove the following
32)
34)
Spare part number
769075-501
769075-001
769076-501
769076-001
System board 45