HP Pavilion x360 Maintenance And Service Manual page 45

4. Release the display TouchScreen cable from the routing clip (4) built into the bottom cover.
5. Remove the three Phillips PM2.5×5.7 screws (1) and the Phillips PM2.5×3.3 screw (2) that secure the
display assembly to the bottom cover.
6. Remove the display assembly (3).
7. If it is necessary to replace the display panel or any of the display assembly internal components:
a. Remove the display bezel screw covers (1).
The screw covers are included in the Rubber Kits, spare part numbers 768019-001 (for use only on
computer models in natural silver finish) and 768018-001 (for use only on computer models in
vibrant red finish).
Display assembly 39