Dv Camcorder Dubbing; Before Dv Camcorder Dubbing; Preparing For Dv Camcorder Dubbing - Sony RDR-HX780 Operating Instructions Manual

DV Camcorder Dubbing

Before DV Camcorder
Dubbing
This section explains dubbing with a DV
camcorder and playing the contents of a DV
camcorder via the DV IN jack on the front
panel. If you want to dub by way of the
LINE IN jacks, see "Recording from
Connected Equipment" on page 46.
The DV IN jack on this recorder conforms to
the i.LINK standard.
Follow the instructions in "Preparing for DV
camcorder dubbing," and then move on to
the section on dubbing. For more
information about i.LINK, see "About
i.LINK" on page 128.
How chapters are created
The contents dubbed to the HDD or DVD
become a single title. This title is divided
into chapters. When dubbing to the HDD or
a DVD-RW/DVD-R (VR mode) and when
"Auto Chapter (HDD/VR)" is set to "On" in
the "Recording" setup (page 105), each
shooting session on the tape becomes a
chapter on the disc. For other discs, the
recorder divides the title into chapters
according to the "Auto Chapter (Video)" or
"Auto Chapter (DVD+R/+RW)" setting in
the "Recording" setup (page 105).
Preparing for DV camcorder
dubbing
You can connect a DV camcorder to the DV
IN jack on the recorder to record or edit from
a DV/Digital8 format tape. Operation is
straightforward because the recorder will
fast forward and rewind the tape for you –
you do not need to operate your DV
camcorder.
Refer as well to the instruction manual
supplied with the DV camcorder before
connecting.
72
z Hint
If you plan to do additional editing on a disc after
the initial dub, use the DV IN jack and record on a
DVD-RW/DVD-R (VR mode) or HDD.
b
Notes
• You cannot make a recording while DV
camcorder dubbing.
• The DV IN jack is for input only. It will not
output signals.
• You cannot use the DV IN jack when:
– signal input to the DV IN jack on the front
panel or recorder operation cannot be
performed correctly when using a digital video
camera (see "About i.LINK" on page 128).
Connect the camera to the LINE IN jacks and
follow the instructions of "Recording from
Connected Equipment" on page 46.
– the input signal is not in DVC-SD format. Do
not connect a MICRO MV format digital video
camera even if it has an i.LINK jack.
– the images on the tape contain copy protection
signals, which limit recording.
• If you want to play DVDs dubbed from a DV
camcorder on other DVD equipment, finalize the
disc (page 38).
• Be sure to set the DV camcorder to the NTSC
color system.
Hookups
to DV IN
i.LINK cable
(not supplied)
DV output
: Signal flow
DVD recorder
DV camcorder