Hoover VHD 616 ZI User Instruction page 26

Night Option Button
Press this button (available for all the washing programmes) to reduce the intermediate spin
speed to 400 rpm, where applicable; the water level is increased during rinsing and the
washing is kept immersed in water after the final rinse in order to spread the fibres evenly.
During the phase in which the water is held in the tub, the indicator lights to show that the
machine is at a standstill.
Release the button to end the cycle with a spin dry (which may be reduced or cancelled
using the appropriate button) and emptying phase.
Thanks to electronic control, the water in the intermediate phases is emptied silently, making
this option very useful for washing at night.
"Wash Time" button
By selecting this button (active only on COTTON and MIXED FIBRES programmes) there is a
choice of 3 levels of wash intensity, depending on how much the fabrics are soiled.
Once the programme and wash temperature have been selected the degree of soiling level is
automatically set to the minimum allowed; pressing the button increases the level and the
settings for the cycle duration are also adjusted accordingly.
The 3 levels of wash intensity shown in the display are:
< hh : mm > < <hh : mm > >
MINIMUM
Select Spin
On selecting the wash programme the display will inform you of the maximum spin speed
permitted for that programme. By repeatedly pressing the select spin button the speed will
decrease by increments of 100 rpm. The minimum speed permitted is 400 rpm, or by
continuously pressing the select spin option the spin may be cancelled if desired.
Note: this model is fitted with an electronic "sensor" device that
checks the load is balanced correctly. If the load is slightly
unbalanced the machine will re-balance it automatically to then
carry out the normal spin.
If, after several attempts, balance is not restored a reduced spin
speed will be used. If loads are seriously unbalanced the spin
stage will be cancelled.
This helps limit vibration, reduce noise and improve
the washing machine's reliability and life.
< < < hh : mm > > >
MEDIUM MAXIMUM
50
F
Display INTER@CT
Speed spin
of the
selected
programme
G
"Wash Temperature" button
The Wash Temperature button allows a reduction in the wash temperature in each
programme.
Each time the button is pressed the temperature decreases by 10°C until a minimum of 15°C
(cold wash).
Note: The temperature must be adjusted before selecting WASH TIME.
Buttons indicator light
The indicator light buttons will light when specific options are selected.
Door Handle
H
Press the button inside the door handle to open the door.
DOOR SECURITY indicator light
The "Door Security" indicator light is illuminated when the door is fully closed and the machine is ON.
When "Start/Pause" is pressed on the machine with the door closed the indicator will flash
momentarily and then illuminate.
If the door is not closed the indicator will continue to flash.
A special safety device prevents the door from being opened immediately after the end of the cycle.
Wait for 2 minutes after the wash cycle has finished and the "Door Security" light has gone out
before opening the door. At the end of the cycle turn the programme selector to "OFF" .
r.p.m. x 100
16 COTTON
Selected programme description
51
L
Temp
ºC
90
Max
temperature
of the
selected
programme
N
O
P
Q