Screen Scroll Operation - Lexus RX450H Navigation System Owner's Manual

1. BASIC INFORMATION BEFORE OPERATION
SCREEN SCROLL
OPERATION
When any point on the map is selected,
that point moves to the center of the
screen and is shown by the cursor mark
( ).
 Use the scroll feature to move the desired
point to the center of the screen for looking
at a point on the map that is different from
the current position.
 To scroll over the map, place the pointer in
a position near the desired destination and
then press and hold the Remote Touch
knob. The map will continue scrolling in that
direction until the knob is released.
 A street name, city name, etc. of the
selected point will be shown, depending on
the scale of the map (
the current position to
shown ( ).
42
RX450h/350_Navi_U
 After the screen is scrolled, the map
remains centered at the selected location
until another function is activated. The
current position mark will continue to
move along your actual route and may
move off the screen. When the "MAP/
VOICE" button on the Remote Touch is
pressed, the current position mark
returns to the center of the screen and
the map moves as the vehicle proceeds
along the designated route.
 When the scroll feature is used, the cur-
rent position mark may disappear from
the screen. Press the "MAP/VOICE"
button on the Remote Touch to display
the current position on the map screen.
A specific point on the map can be set as
a destination using the scroll function.
1
Select "Enter ".
). Distance from
will also be
 The screen changes and displays the map
location of the selected destination and the
route
ROUTE GUIDANCE" on page 89.)
TO SET THE CURSOR
POSITION AS A DESTINATION
preference. (See "STARTING