Selecting A Station; Radio Broadcast Data System - Lexus RX450H Navigation System Owner's Manual

1. AUDIO/VIDEO SYSTEM OPERATION

SELECTING A STATION

Tune in the desired station using one of
the following methods.
Preset tuning: Select one of the mix preset
channels on the left side of the screen or
press the " " or " " button of
"PRST·TRACK" to select the desired sta-
tion. The screen button is highlighted and
the station frequency appears on the
screen.
Seek tuning: Press and hold the " " or " "
button of "PRST·TRACK". The radio will
begin seeking up or down for a station of the
nearest frequency and will stop when a sta-
tion is found. Each time the button is
pressed, the stations will be searched auto-
matically one after another.
To scan all the frequencies: Select
"SCAN". "SCAN" will appear on the
screen. The radio will find the next station
and stay there for 10 seconds if "All" or "HD
Only" is selected, or 5 seconds if "Analog"
is selected, and then scan again. To stay
tuned to a station and stop the scanning, se-
lect "SCAN" again. (To set HD Radio™
system, see page 312.)
222
RX450h/350_Navi_U
RADIO BROADCAST DATA
SYSTEM
This audio system is equipped with Ra-
dio Broadcast Data Systems (RBDS).
RBDS mode allows text messages to be
received from radio stations that utilize
RBDS transmitters.
When RBDS is on, the radio can
— only select stations of a particular pro-
gram type,
— display messages from radio stations,
— search for a stronger signal station.
RBDS features are available only when
listening to an FM station that
broadcasts RBDS information and the
"FM info" indicator is on.
SELECTING A DESIRED TYPE
1
Select "Options".